Cannot Open Hasp Driver Image Pro Plus

HASP and HARDLOCK dongle dumper/emulator features:

Hasp Driver For Windows 10
Cannot Open Hasp Driver Image Pro Plus Download

Emulates HASP SRM, HASP HL, HASP 4, HASP 3 and HARDLOCK dongles
Emulates new SafeNet Inc HASP Key and SafeNet Inc Sentinel HL Key dongles family
All types of HASP keys are supported: HASP, MemoHASP, NetHASP and TimeHASP
No limitation on quantity of supported programs
Transparent for other dongles. You can use emulator and original hardware key at the same time
Doesn't change anything within software and doesn't replace original driver
Free lifetime support and updates
Digitally signed for Windows x64 operational system

Dear Community, I have a software program I bought years ago that uses a USB hardware key running on Windows Vista. The HASP driver version that came with. Dongle problem with Viking software. Dongle problem with Viking software (post #30530) Foster on Mon. Husqvarna gave me instructions to download and load a new driver but still I cannot get it to work. It is listed as HASP Dongle Drivers in the Other Useful Software on the Helpdesk embroidery software page. I hope this helps!

Image hasp driver cannot pro plus open. I rotate, Id say up until you pro plus, pro driver hasps youre pro pro is a image and hasp. Image hasp driver cannot pro plus. HASP Key Drivers Reinstallation Instructions. Accessing the driver, it cannot terminate. Will open, confirming that your HASP driver has been.

Select your Trimble product to find product technical support and other resources, including product manuals, software downloads, and detailed troubleshooting information. Trimble Protected Plus for TAP Solutions Trimble Protected Plus for Agriculture Trimble Protected Plus for Survey Equipment. Service and Support. Trimble Survey Pro. This is the reason that if you try to install Image Pro Plus 4.X on Windows XP you will encounter errors first with the HASP device driver and with many of the So, these statements will open the exact same files each time the macro is run.

Since 1998 we provide our users with fully automatic dongle backup utilities and dongle emulators.

Aladdin HASP Emulation Step-by-step instruction

Step 1. Downloading

Please download Aladdin HASP SRM, HASP HL and Hardlock FAST E-Y-E dongle dumper from:
HASPHL2010.ZIP v4.91 (1.3mb)

Step 2. Start HASPHL2010

First of all unpack HASPHL2010.zip and put HASPHL2010.exe to any folder on your drive and run HASPHL2010.exe on machine that has latest version of Aladdin HASP HLdongle drivers installed and your parallel port or USB hardware dongle connected to computer.

Step 3. Install service

HASPHL2010 HASP/Hardlock dumper and emulator is a low level kernel mode driver and requires Administrators privileges to be installed.

When you start HASPHL2010.exe for a first time you'll see following:

Press 'INSTALL' button and wait for Driver status to changed to 'Status : driver is installed'

Step 4. Starting service

Now you need to open 'Emulator' tab.

Then you press 'Start Service' button. If everything is ok you'll see

Windows 7 x64, Windows Vista x64 and Windows 2008 Server require special digital signature

You can press F8 button on bootup and then selected to disable check for signed drivers or enable test signature using Driver Signature Enforcement Overrrider utility. All you need is to disable User Access Control (UAC) in your Control Panel, reboot the computer, then start Driver Signature Enforcement Overrider, select 'Enable Test mode' option, then reboot your system again. Then Dongle emulator driver will be ready for running in your Windows x64 environment.

Here is the link to Driver Signature Enforcement Overrider: http://www.ngohq.com/home.php?page=dseo

Please note, this procedure is required for reading your key only. We do have digitally signed emulator that doesn't require Test mode on your computer.

Step 5. Running your software

To find your key it is necessary to start protected software.

Step 6. Reading your key.

Open 'DUMPER' tab.

HASP/HL Dongles window shows logged HASP dongle passwords. There can be up to 10 different passwords but it doesn't mean that all dongles are connected to computer.
When you press 'DUMP' button Dumper will try to read all of Logged donglesand save all dump files.

Dump files are stored in folder containing HASPHL2010.exe and have '.DMP' or '.BIN'extension.(In our example created file is called 3C3925A0.dmp )

If there are no HASP passwords press 'REFRESH' button. If it doesn't help and 'DUMP' button is still disabled it means your software doesn't work with HASP and uses different kind of dongle brand or doesn't use low level drivers (usually old DOS or WIN16 software doesn't use HASP drivers)

Step 7. Sending dumps and getting trial version of Aladdin HASP SRM / HL dongle emulator

Dongle emulator is not a dongle crack, it is legitimate digital copy of the license you paid for. It eliminates your risks and protects youagains possible loses.

Please send created dump files to sales@donglebackup.com

NEW! You can also use our Ticket system to send us dump file directly and securely.

We'll send trial version of HASP dongle emulator as soon as get your dump.Usually it doesn't take more than 24 hours. Trial version has one week time limitations but it is enough to make sureyour software can perfectly work without hardware key attached to computer.

Step 8. Everything works and you decide to purchase full unlimited version

If everything works fine and you want to buy full version of Aladdin crack let us know assoon as possible to get discount. Just drop us e-mail to sales@donglebackup.com to receive payment details.

Questions

If you need additional information or want to ask some questions -feel free to send us e-mail to sales@donglebackup.com or use ORDER page.

WelcomeToMM Group'sweb page

Need HASP or HASP HLor other DONGLE DUPLICATE ?

(hardware copy)

IF YOU do not know what kind of USB dongleyou have or something unclear

click here to identify it

if you know what you want

READ LPT (PRINTER PORT) TYPE HASP click here

read USB TYPE HASP click here

HASP - Duplicators

Page was modified on06.09.2016

Dongleis a device to plug in to the LPT (or other) port. It is used to storesome information and to communicate with protected software. Ifsoftware can't find required dongle, it will not run properly. It'smain purpose copy protection. HASP (R) is a trademark name of donglesmanufactured by Alladin.

A:HASP wiring scheme is common for all HASP dongles. The unique is onlyfunctional and memory content inside the HASP chips. In case of Memo-x,NetHASP, TimeHASP, HASP36,HASP4 the PC talks to dongle via D0-D7 wires(pin 2 ..9 on D25 parallel port connector, in the case of LPT). Thedongle answers to PC via 'PaperEnd' (pin 12 ) wire. All other wires areused just to supply a power or switch it on/off.

Toanalyze HASP protocol yourself you will need logic state analyzer withat least 9 (better 12) channels. The sampling rate must be minimum 2times higher than your parallel port speed. Also it must have multipletriggering capability and enough memory.

Exampleof HASP logic state analysis here. and we will do it for you.

Thereare 3 ways to avoid you dongle:

1.Modify protected software - usually complicated and can causelost of some functionality of software. It is also illegal in many states.

2.Use HASP driver emulator is good way, but it does not always workperfectly, especially sensitive for upgrades and OS changes. Sometimesexpensive.

3.Make hardware duplicate of your original HASP. This is also good wayand there is no need to modify/create any software. If you do not wantto touch HASP protected soft due legal issues or worry tocause its proper operation - read below.

How wedo HASP hardware

You will only need to read data of you HASP. But you don't have tosend a HASP to Us! (thisis usual question). Simply we will send you small program which in fewseconds will read all data from your HASP and write it to separatefile. This file you should send back to us and from supplied data wewill develop your HASP dongle replacement. And we can do a lot of them!!!

INSTRUCTIONS HOW TO IDENTIFY YOUR DONGLE
Thereare vast number of various dongles floating around, and 'Hasp' is justone kind of them. How to know which one is in your hands? It could beSafeNet Sentinel, Rockey, ILok, Gemplus,Hardlock, Marx, Wibu oranything else. All they made by different vendors, has differentfunctions and appearance. The first thing you need to know whatexactly you have. Luckily Microsoft developed nice application'UVCView.exe' which can show all devices plugged in to USB ports ofcomputer and pull all basic identification information out of it. Belowis step-by step instruction how to get identification data out of yourdongle:
1.	Download archivedUVCView.zip here Is it safe? UVCView is not our product. It is Open source sample applicationdeveloped by Microsoft (R) and included with Windows(R) driverdevelopment kit. If you don't trust this site, just search for'UVCview' on internet and download from wherever you want.
2.	Unpack and run (doubleclick)UVCView.x86.exe
3.	On the left side you can seeall USB ports and devices of your PC
4.	Plug your USB dongle andpress 'Refresh' in File menu to see the latest list. (Sometimes Refresh is done automatically)
5.	Click on the device and all its information showup on the right side
6.	Save thatinformation in to Key.txt file by going to menu File, Save As..., enterfile name and Save
.
7.	Email Key.txt file to dongle@nsys.by Sowe can verify what sort of dongle is it, how it can be duplicated, andwhat are future instructions and procedures for creating its duplicate. We reply usually within 24 hours.
Note:
Theidentification technique is Vendor independent and works with any USBdevice, even with USB Flash drive. You can play with it as much as youlike. There is no need to have any drivers or any softwareinstalled. If you would see 'Found New Hardware' you cansafelycancel installation.
(this is only forprallel port dongles!)
1.	Download Haspdata reader hasp4rdr.exe
2.	Prepare empty floppy disk and run dowloaded Hasp4rdr.exe	app will ask you to insert floppy and writes DOS boot files and Hasp4 reader on it
3.	You will getMS-DOS boot disk with Hasp4 reader on it
4.	Read 'ReadMe.txt'file on the disk.
5.	Plug your Hasp into LPT port
6.	RebootPC from this floppy. Folowonscreen instructions & read your hasps data	Thenyou will get your HASP data file with all memory content an otherinternal settings saved in *.hsp file on the same floppy Ifsomething unclear - contact us: dongle@nsys.by
7.	E-maireceived hasp datafile *.hsp back to dongle@nsys.by
8.	Thenwe will verify if all data grabbed correctly and estimate a price ofyour HASP duplicate. From this data we will develop twin of your HASP !!!!
something ???		<= Readabut this here
<= Read about this here
Contact Info:	MM Group By Email : dongle@nsys.by

Hasp Driver For Windows 10

INSTRUCTIONS FOR USB HASP REPLICAARE BELOW

(if something not works -send us dongle identification data as instructed here )

Before we can read a Hasp - we need toknow our Hasp passwords. They are diferent for each softwarevendor.

If you don't know them or don't know what they are -read how to get Hasp Passwords

If you know them - continue to reading sep by stepprocedure below.

1.	Nowwe have our hasp passwords ready and your hasp plugged. Notethat from this point everything can be done on any PC. Itis not need to have your protected application installed. DownloadHasp reader archive: HaspHLrdr.zip(165kb)
2.	Createseparate folder for it. For example C:HaspHLrdr
3.	Unzipdownloaded archive in to this new folder. It is 3 file inside: HaspHLrdr.exe, Dongdupe.sys, Dongdupe.inf
4.	Firstof all we need to install reader drivers. This is a standard OSprocedure as for any other hardware but for clarity it is illustratedbelow. Note that later driver can be removed in same way.
5.	Goto 'Start' => 'Settings' => 'ControlPanel' => 'System'
6.	Select 'Hardware' tab=> 'Device Manager' and then in USB Devices tree find our USBdevice. In most cases it will be 'Aladdin USB Key'. Now RIGHTCLICK mouse on it and select 'Update Driver...' P.s Device Manager can also be reached in other ways.
7.	Hardware UpdateWizard will start. When offered - select 'No, not this time'and go 'Next'.
8.	Select 'Install from a listor specific location' and go 'Next'
9.	On the search and installoptions select 'Don't search. I will choose the driver to install' andgo 'Next'
10.	Then offered to selectdriver to install. It could be seen a number of items on the list -just ignore them and press 'Have Disk...'
11.	Opens Install from Diskdialog - press 'Browse...' and locate dongledupe.inf file which is inthe same folder where we unzipped whole reader - see step_3above. In our example it is C:HaspHLrdr. Select it, then 'Open' and 'OK'.
12.	Later you can see a warningthat Dongle-Duplicate driver is not passed Windows Logo. Select'Continue Anyway'
13.	Atthe end is final screen saying that installation done. Select 'Finish'. Herewe MUST Restart PC. In mostcases it will be the ask to do so from Windows, but if not - we sillneed to reboot now.
14.	After restart we can go toDevice Manager again and verify if our driver is loaded ok - see steps5. and 6. above. On the list we should see 'Dongle-Duplicate readingdriver'. Note that hasp has to be plugged all this time.
15.	Now we a fully ready toread. Go to the folder where reader is - in our example it isC:HaspHLrdr Run HaspHLrdr.exe enter your hasp passwords(in our example they was 3C39:25A0) and press 'Read'. Wait few minutes until it tells that readingdone and data in to file saved. This data file with DMP extension savedin same to same folder where reader is. Find it and email to dongle@nsys.by

Cannot Open Hasp Driver Image Pro Plus Download

Contact Info:

Any questions or something not works - write:

Email : dongle@nsys.by

Respond within 24 hours.