• Program Gm 300 Motorola Phone
• Motorola Gm300 Program Kablosu

Motorola Radius GM-300 Two Way Radios (lot Of 2). Condition is Used. Both radios have the same model number of: M43GMC29C2AA No mics, no power cables, no accessories. Motorola GM 300 (GM300 GM-300) Radio Programming, 8 to 16 channel expansion Introduction. The Motorola GM300 can be re-programmed quite easily to allow use on our Amateur Radio bands. Motorola RSS GM/GP-300, IDEN, Repeater Series. GM-300 Hacked, upgrade your GM300 from 8 to 16 channels, or from 16 up to 40! MAXTRAC - LAB - VERSION SUPER LAB USE FOR ALL MODELS 100-300-800-900-VHF-UHF 1997 MOTOROLA USA LTD. F17.81.12 19-FEB-97 MAXTRAC MOBILE MAXTRAC - LS LTR TRUNKING.

Program a Motorola GM300 via FTDI to RJ45 #hamradio #hamr #msdos #vmware The Motorola GM300 was a robust radio in its heyday, part of the Radius family of devices that was also compatible with MaxTrac accessories.

MOTOTRBO™ SL300 portable radio provides reliable push-to-talk communication for the mobile, everyday user in an ultra-slim and rugged profile.

Whether you're working in the field or at a black-tie event, the SL300 is boldly designed to keep you efficiently connected. Measuring under an inch thick, the SL300 is ultra-portable with a stubby antenna, curved edges and rugged frame. It features an Active View display with a matrix of LED lights behind the radio housing and “Range Max” technology, an advanced radio design and patented antenna for enhanced range. Designed for easy and intuitive use and outfitted with the latest technology, the SL300 is the perfect work partner.
Radios include:
SL300 Active View Display
SL300 Non-Display

• Product Info
• Accessories
• Resources
• Partner Tools

MOTOTRBO SL300 Portable Two-way Radio

Product Info

MOTOTRBO SL300 Portable Two-way Radio

Features

Ultra-Slim

Measuring less than an inch thick, the SL300 redefines portability. It can be carried easily in a pocket or purse without catching or bulging.

Simple Operation

The SL300 features a separate power button, top channel toggle switch, side volume control buttons, and prominent push-to-talk button to support one-hand radio operation.

Dual Capacity Direct Mode

Utilize the power of the 2-slot TDMA DMR standard to double the capacity of your 12.5 kHz channel—without the need for a repeater.

IP54 Rated

Rugged and reliable, the SL300 is splashproof and dustproof for use in harsh environments.

Range Max Receiver

An advanced radio design and patented antenna which delivers enhanced range while maintaining a slim profile and long battery life.

Comprehensive accessory portfolio

Innovative carry options, earpieces and charging stations allow you to get maximum efficiency from your SL300.

Active View Display – optional

Shatterproof Active View display uses hidden LED lighting to communicate channel, radio, and volume information crisply in both daytime and nighttime situations.

Analog/Digital

Get all the benefits of digital, including better voice quality, better range and better battery life—but retain compatibility with your existing radio fleet. With analog and digital capability, you have the freedom to migrate to the latest technology at your own pace.

Transmit Interrupt Capability

Enables a supervisor to interrupt another radio conversation to deliver critical communication exactly when and where it’s needed.

Voice Announcement

Audible prompts confirm operations on your radio, allowing you to keep your eyes on the job.

MicroUSB Connectivity

Efficient charging and easy programming.

Specification Sheet

MOTOTRBO SL300 Data Sheet

MOTOTRBO SL300 Series Data Sheet

Performance Characteristics

• Standard battery chemistry type

  Lithium Ion

• Repeater capable

  Yes

• Power

  1, 2, 3, Watt

• Estimated battery life

  Analog (hours) - 12.5 (VHF Non-Display), 11.8 (VHF Display); 12.5 (UHF Non-Display), 11.8 (UHF Display)
  Digital - 15 (VHF Non-Display), 14 (VHF Digital); 15 (UHF Non-Display), 14 (UHF Display)
  

• Frequency range

  VHF - 136 - 174 MHz;
  UHF - 403 - 470 MHz
  

• Power

  3.7V (Nominal)
  

• Frequency band

  VHF, UHF

Physical Characteristics

• Display

  No Display, Active View

• Dimensions H x W x D (with standard battery)

  4.95 X 2.17 x 0.87 in
  (125.7 X 55.0 X 22.0 mm)
  

• Weight (with standard battery)

  VHF: 5.96 oz (168.9 g), UHF: 5.84 oz (165.6 g)
  

Radio Features

• Voice announcement

  Yes

• Group call

  Yes

• Programmable buttons

  Yes

• Talkaround

  Yes

• Number of channels

  2, 99
  

• Channel spacing (kHz)

  6.25, 12.5

• One to one calling

  Yes

• Missed call alerts

  Yes

User Environment

• Mil spec

  810 C, 810 D, 810 E, 810 F, 810 G

• IP Standards

  IP54

Related Products

• CP200d Portable Two-Way Radio

  Simple and efficient, with the flexibility to expand to digital as your business grows.

• SL 7000 Series Portable Two-Way Radio

  So incredibly thin and light, MOTOTRBO’s ultimate in discreet communications.

• XPR 7000 Series Portable Two-Way Radio

  Be safer and smarter on the job with best-in-class audio and data.

• MOTOTRBO™ Commercial Systems

  This solution provides you with the option of buying monthly airtime service on a regional radio network.

1-Wire Surveillance Kit (PMLN7158)

Accessories

This enhanced design provides an easy to access microphone and push-to-talk in a single wire. Designed for SL Series Radios.

2-Wire Surveillance Kits (PMLN7157)

Accessories

2-wire surveillance kit features easy accessible microphone and push-to-talk combined. Designed for SL Series Radios.

Adjustable D-Style Earpiece (PMLN7159)

Accessories

Designed to create an ideal fit, this comfortable and adjustable earpiece sits over the ear and is compatible with SL Series Radios.

Mag One Earbud (PMLN7156)

Accessories

Designed for SL Series Radios, this earbud features an in-line microphone. push-to-talk and voice-activated switch.

PMLN7159

Accessories

PMLN7851A 关键作业型蓝牙PTT耳机

Accessories

Swivel Earpiece (PMLN7189)

Accessories

This swivel earpiece can be worn on either left or right side and features an in-line microphone and push-to-talk. Designed for SL Series Radios.

ATU-6A

Antennas

UHF flexible Whip Antenna, easily screws into your VX and EVX radios.

PMNN4468

Batteries

Flexible Hand Strap (PMLN7076)

Carry Accessories

This strap is designed for use with the SL300 Radio.

Heavy-duty Belt Clip (PMLN7128)

Carry Accessories

Secure the SL300 to your belt with this heavy-duty clip.

Nylon Wrist Strap (PMLN6074)

Carry Accessories

This wrist strap is designed for use with the SL Series Radios.

Swivel Carry Holster (PMLN7190)

Carry Accessories

This sleek carry holster is designed for SL300 Radios.

25009298001

Chargers and Reconditioners

PMLN7101

Chargers and Reconditioners

This compact multi-unit charger is designed to charge up to six SL300 Radios.

PMLN7109

Chargers and Reconditioners

Standard single-unit desk charger for SL300 Radios.

MOTOTRBO SL300 Portable Two-way Radio

Brochures

• MOTOTRBO Two-Way Radio Solutions At a Glance

  A complete overview of MOTOTRBO Radios, Accessories, Systems, Applications & Services.

• MOTOTRBO Commercial Tier Accessory Catalog

  MOTOTRBO Commercial Tier Accessory Catalog

User Guides and Manuals

• MOTOTRBO SL300 Display Radio

  MOTOTRBO SL Series SL300 Display Portable Radios User Guide

• MOTOTRBO SL300 Non-Display Radio

  MOTOTRBO SL Series SL300 Non-Display Portable Radios User Guide

The GM300 was Motorola's next step in the MaxTrac / Radius mobile product lines. The schematics are remarkably similar. You can even interchange some boards between the GM300 and MaxTrac radios. Like the MaxTrac, the GM300 line has been discontinued by the manufacturer. Throughout this article, reference to MaxTrac radios implies Radius radios as well.

Naturally, you need different programming software (RSS), but if you've ever programmed a MaxTrac, you'll be right at home with the GM300. The radios operate the same, too. See below for more info on the RSS and programming.

GM300 mobile radios cover the VHF (136-174 MHz in two ranges) and UHF (403-520 MHz in four ranges) bands, with 8 or 16 channels, 12.5 or 20/25/30 kHz channel spacing, and 10, 25, and 35-45 watt power levels. They use the same accessories (loudspeakers, microphones, accessory plugs, power cords, mounting brackets, etc.) as the MaxTracs.

The M120 radio is just about the same as a GM300 but has 'less features' - this would be the 2-channel version, equivalent to a MaxTrac 50. There is also an M10 single-channel radio, and an M130 2-channel radio that is an M120 with the GM300's signaling capabilities.

The 16ch GM300 radio uses the expanded logic board with firmware in an EPROM that gives you the ability to program several of the accessory jack pins and also gives you several signaling systems, such as MDC1200. The 8ch GM300 and the M-series all use the masked logic board that has no programmable pins. The masked logic board also has limited code plug space, hence fewer channels and less capabilities.

Here's a front view photo of a 16-channel MaxTrac, a 16-channel GM300, and a 2-channel MaxTrac:

GM300 Model Numbers:

The first six characters are pretty much standard Motorola convention. The IF frequency is usually 45.1 MHz but if you have multiple radios near each other, this can cause interference, so you can optionally order the radio with an alternate IF frequency.

The XV-series seems to all be 1 channel radios. The XQ-series seems to be all 2 channel radios. The GM-series can be 2, 8, or 16 channel radios. The XV and XQ may be used by the M10, M120, and M130 radios.

The second six characters provide a lot of useful information about the capabilities of the radio and the boards contained within it.

A typical model number would be M44GMC09C3A_. This is a 40 watt, UHF radio, 45.1 MHz IF, narrow spacing (12.5 kHz), 16 channels, expanded logic board, 438-470 MHz band.

It is rare that the model number includes the specific frequency range the radio is capable of handling (10th character). You don't get that lucky with MaxTracs, Spectras, etc. I wish all the model numbering was so useful. It is NOT practical to change the frequency range for which the radio was manufactured. The RF board and PA assembly are frequency-dependent; the logic board and front panel are not. As the model number tells you which range the radio is, if you end up with the wrong one (assuming the radio hasn't been thrown together out of spare parts or had modules swapped) it's your own fault for not doing your homework.

The expanded logic board has its firmware contained in a socketed EPROM, which can be replaced. The masked logic board has its firmware permanently stored in the soldered-in microprocessor IC. People have apparently modified the RSS to get 16 channels from masked logic board radios and 40 channels from expanded logic board radios.

It would appear that GM300s are not capable of any form of trunking operation. However they can do G-Star signaling for use with GE radio systems.

There are other models, such as M10, that are often called GM300. This article is specifically oriented towards the radios with 'GMC' in the model number.

Specifications:

Click on the image to enlarge it.

Note that a revision to the service manual shows two VHF ranges: 136-162 MHz and 146-174 MHz. Also, the power levels are continuously variable throughout the three ranges: 1-10, 10-25, 25-45 watts.

Board Numbers:

This list is sorted alphabetically by Function, then Description.

Logic Board Jumpers:

Click on any image to enlarge it.

The documentation page above lists the jumpers as JUnnn. For some reason these are shown on the board layouts as either Pnnn or JUnnn. They're the same thing. There may or may not be silk-screened legend on the boards; it depends on the revision level.

There are two quite different logic boards used with the GM300. One (the expanded logic board) has a shield over the microprocessor components, its program is stored in a socketed EPROM, and the board has four layers, while the other (the masked logic board) has all the components exposed, its program is stored within the microprocessor, and the board only has two layers. The image below shows the location of the jumpers on the two-layer (masked) board:

The image below shows the location of the jumpers on the four-layer (expanded) board.

These jumpers are quite visible on the photo of the expanded GM300 logic board below. Note that some of them are also present on MaxTracs and have the same functions.

Accessory Connector:

Click on the image to enlarge it.

Note that the 8-channel radio signals are slightly different than the 16-channel radio signals. That may be due to the masked vs. expanded logic board. Fortunately, you can use an accessory plug wired for a MaxTrac (7-9, 15-16) in a GM300.

Click on the image to enlarge it.

The accessory connector and pins are also well documented in the MaxTrac section.

Note that many accessory pins on the expanded (four-layer) logic board are programmable, whereas you're stuck with the pin assignments on the masked (two-layer) logic board and these can't be modified.

Channel Steering:

The 16-channel expanded logic board radios support 'channel steering' through the accessory connector. You need to program the general-purpose I/O pins (6, 8, 9, 12, and 14) for 'Channel Select'. They turn into a binary coded input that allows you to select any of the possible 16 channels by grounding the appropriate input lines (assuming you've programmed the radio for active-low inputs). To select channel 1, ground the 'Channel Select 1' line. Channels 1, 2, 4, 8, or 16 may be selected by grounding select line 1, 2, 3, 4, or 5 respectively. All other channels are selected by grounding multiple select lines. If you release all of these lines, the radio reverts to the channel selected by the front panel. If you select a channel that does not exist (i.e. 10 channels programmed and you select channel 16), the radio reverts to the channel selected by the front panel. Channel steering DOES work as expected on radios with more than 16 channels, i.e. you can select anything up to channel 31, as that's all that's possible with five select lines. This article tells you how to use channel steering.

Pins 4, 8, 12, 14 can be configured for COR. Pins 6, 8, 9, 12, 14 can be configured for Channel Select. So you can put COR on pin 4 and CS on the others. The fact that the masked (8-channel) radios and most MaxTrac users selected pin 8 for PL&COR Detect is something that will have to be changed if you want multiple features activated. It's up to the user to choose the desired functionality given the number (six) of programmable I/O lines.

The Motorola Radius programming software also supports Channel Steering if you have Version 21.01 firmware in the radio and a 16-pin logic board. Unfortunately, the MaxTrac software does NOT offer this feature, so if you have a MaxTrac and you want channel steering, you have to install the Version 21.01 firmware, then blank and initialize the radio with RADMBL software, turning it into a Radius model, just so you can program the accessory connector to handle channel steering. Also, the Radius software only provides for three Channel Select input lines, not five like the GM300. This means you can only select channels 1 through 7 plus whatever the front panel has selected, regardless of how many channels the radio might be programmed with.

Programming:

The HVN8177 programming software (RSS) programs the M10, M120, M130, and GM300 mobiles, as well as the GR300, GR400, and GR500 desktop repeaters. The latest release is HVN8177F version R05.00.00 dated December 1995. The RSS is shipped on 3.5-inch diskettes and is a DOS-only program.

The microphone connector is exactly the same as on a MaxTrac, and it's also well-documented in the MaxTrac section. The programming cable and RIB setup is the same as what you'd use for a MaxTrac or GTX.

You can hex-edit the MDF file in the RSS to allow an 8-channel radio to take 16 channels. Additional information is available at Colin Lowe's web site.

The GM300 with the expanded logic board supports the same common signaling modes as a MaxTrac (PL, DPL, MDC, etc.).

Ignition Control:

Like the MaxTrac, the GM300 radios also have optional Ignition Control via the Accessory connector. This 12V signal runs through a fuse (F801) on the logic board. Its location depends on whether you have a masked logic board or an enhanced logic board. If you don't want this feature you will need to install a new fuse, a solid wire jumper, or a 1-10 ohm 1/4w resistor in its place. . For either board, the fuse/jumper is located near the Accessory connector and is outlined with a yellow box.

The photo below shows the location of the fuse/jumper you need to cut/remove to enable Ignition Control on a Masked Logic Board.

The photo below shows the location of the fuse/jumper you need to cut/remove to enable Ignition Control on an Enhanced Logic Board.

Differences from a MaxTrac:

The GM300 has models that fully cover the 144-148 MHz and 440-450 MHz amateur bands. Some MaxTracs will go that low if you adjust the VCO and hex-edit the RSS.

The GM300 RF boards have a local/distant attenuator in the receiver front end. This reduces the gain of the receiver and improves intermod rejection by 10dB. You can put a GM300 RF board into a MaxTrac, but there will be no control of the local/DX circuit, and the radio will have poor sensitivity. The circuit can be activated by soldering a small jumper on the RF board. The GM300 RSS and logic boards know how to control this circuitry; the MaxTrac RSS and logic boards do not.

The GM300 control head is quite similar to the MaxTrac. There is an additional circuit board, soldered to the logic board pins, that the control head connectors plug into, that provides some RF filtering and Zener diodes to protect from excessive voltage. The control head connectors are wired differently from those on MaxTrac/Radius radios. Also, the internal speaker now connects through the control head cables, rather than on its own two-wire cable. This makes it easier to remote-mount a GM300. There are kits available for this purpose.

For comparison, here's the inside view of a MaxTrac. Notice the lack of shielding and no filter board between the logic board and control head.

The GM300 logic board is significantly different from the MaxTrac logic board. It can control the RF board's local/DX circuit. The audio power amplifier is one single IC rather than discrete transistors. The heat-sink is considerably different and mounts only to the bottom of the chassis - no more T8 flat-head screws through the side of the chassis. There are far fewer components on the board too. All GM300 logic boards have a 16-pin accessory connector. A full metal shield covers the entire logic board, just like they have for the RF board; the MaxTrac only shields the microprocessor area. This further reduces spurious emissions.

The GM300 audio amplifier drives both sides of the loudspeaker. Therefore you must NOT ground either pin 1 or pin 16 of the accessory connector. You must run two wires to an external speaker. The same circuit design and components are used on the Spectra radios and they suffer from the same restriction. Grounding either speaker lead may let out the chip's lifetime supply of smoke, even though the manufacturer claims the ICs are short-circuit-proof.

The internal loudspeaker for the GM300 (and MaxTrac/Radius) radios is p/n 5080085D03, however this part number has been replaced by p/n 5004639J01. This is a 22 ohm, 5 watt speaker that retails for around $7US in early 2009. An alternate speaker, with integral mounting flanges, is p/n 5080496Z01. All of these are No Longer Available through Motorola, but can be found on popular auction sites.

The GM300 RF power amplifier has a thermistor mounted near the final transistor, so it actually senses the heat-sink temperature. The logic board uses this to control the output power in a more reasonable way; the power will be reduced if/when the power amplifier gets hot enough, not when the microprocessor 'thinks' it's getting hot from extended use. This makes GM300 radios more suitable for repeater transmitter usage. (They still need adequate forced-air cooling.) This extra signal requires a 6-wire cable and connector between the PA and the logic board (the MaxTracs only have a 5-wire cable and connector). I have heard that you can use a GM300 PA in a MaxTrac by snipping the temperature sensor wire off the connector, but I personally would not butcher either the radio or the cable that way.

Blanking the Radio:

There doesn't seem to be a lab version of RSS for the GM300. You can fool RSS into thinking the radio is blank by manually erasing the serial number (filling it with spaces) and entering a few more bytes using the bit-banging facility available in the MaxTrac lab RSS program. After that, you should be able to initialize the radio using the GM300 RSS or write a previously saved code plug to the radio. Initialization is exactly the same as the steps you'd do for a MaxTrac: set the radio model number, frequency range, signaling features, panel number, serial number, key in the crystal data and 9.6V reading, and align the power amplifier and deviation circuits.

Note: people have used the MaxTrac lab RSS to blank GM300 radios. They then install a MaxTrac EPROM, make some changes to the logic board, and turn the radio into a MaxTrac, including the model number. Then they initialize it with MaxTrac RSS.

To blank the radio, you need to deposit the following data at the locations shown. These values came directly from a factory-fresh blank board. This data will go directly into the radio's memory. You may want to write down the contents of these locations first, incase something goes terribly wrong. Use this at your own risk. All values are hexadecimal.

After setting the memory to these values, the radio will appear blanked to the GM300 RSS, and you'll have to go through the blank board replacement procedure and either align the radio, or fill in the various fields with data that was previously there. You can also write any previously saved code plug to the radio, but make sure you use one that matches the band and number of modes.

During the first screen of the initialization procedure, you'll need to select the frequency range. Go through the entire list using the up-arrow, then go through it a second time to find the exact range. Once the correct range is chosen, you'll have no problem choosing a model number. If you don't see the expected range, go through the entire list again.

By the way, the RSS knows about two 'panel numbers' for these radios: 005 for the multi-digit (8/16 channel) radios, and 004 for the other (1/2 channel) radios, and it covers the Radius GM300, M10, M120, and M130 models.

The value at location B60C is an entry number of the Product Series in the MDF file. There are only four possible values and you must select a value for this location. The value at location B60F seems to depend on which logic board is in the radio. There's a checksum at location B611 but don't bother with it. The table below shows the values that can go into these two locations, based on the logic board, maximum number of channels, and the 9th character of the model number. All values are hexadecimal.

You should always record the original values or make a backup when hex-editing any radio or file.

Program Gm 300 Motorola Phone

Common Problems:

For some reason, GM300s seem to be prone to losing receive sensitivity. Whether this is due to nearby excessive transmitter power or operator error, the eventual cause seems to be either shorted protection diodes across the receiver's input, or a dead first RF amplifier transistor. All of these components require removal of the RF board to access them, but replacement is quite easy. They're surface-mount, of course.

While not a problem, I encountered a VHF radio with a receiver that was a couple kHz off frequency. In addition, it had very distorted audio when I fed a 3 kHz deviated signal into it. The 2nd oscillator crystal frequency was a couple of kHz high too. Replacing the crystal got the receiver back on frequency but the audio distortion was eventually traced to the fact that this was a 12.5 kHz narrow-band receiver and would only accept a 2.5 kHz deviated signal. I had never encountered one like this before and it was completely useless for 5 kHz reception, which is the standard on VHF.

Another common issue is a dead 2nd oscillator crystal. This operates at 44.645 MHz and is used to convert the 45.1 MHz intermediate frequency signal down to 455 kHz for the detector. When the crystal dies, the receiver will hear absolutely nothing. If you have a receiver capable of hearing the crystal frequency, you can pick it up if you remove the shield from the RF board and place the antenna within a few inches of the left side of the radio. If you don't hear the 44.645 MHz signal, the crystal needs to be replaced. These can often be found on a popular auction web site. The Motorola p/n is 48-80008K02 and the crystals are marked '44.645/08K02' so you know they're the right ones.

These radios often go way off frequency, to the point that the warp adjustment will not get it back where it belongs. The cause is most often dirty interconnection pins inside the radio. These are between the RF board and the logic board. On the MaxTrac, they are attached to the logic board; on the GM300 the strip of pins is mounted on the chassis and both boards plug into it. Remove both boards, clean these pins, and reinstall the boards. While the radio is apart, clean the front panel connectors too. These same connectors get dirty on MaxTracs as well, but for some reason they don't often cause serious problems like they do on the GM300. See this article for details and photographs.

Reference Oscillator Coarse Adjustment Procedure:

Rather than type this paragraph, here it is directly from the service manual. This same procedure (with different part references) could also be used with MaxTrac radios.

Manuals and RSS:

• GM300 8-channel Operator's Card, 6880902Z26
• GM300 16-channel Operator's Card, 6880902Z41
• GM300 Owner's Manual, 6880902Z09
• GM300 Service Manual, 6880902Z32
• GM300 RSS, HVN8177F
• GM300 RSS Manual, 6880902Z36

Acknowledgements and Credits:

Dave N1OFJ supplied the GM300 and MaxTrac 50 radios. These photos were taken at his shack.

All photographs were taken, and are copyright, by the author.

Much of the information for this article, and the scanned pages, were obtained from the official Motorola GM300 Service Manual.

A few tidbits of information were gathered from Internet sources.

GM300, MaxTrac, Radius, RSS, PL, DPL, MDC, and probably a bunch of other things, are trademarks of Motorola, Inc.

Contact Information:

The author can be contacted at: his-callsign [ at ] comcast [ dot ] net.

Back to the top of the page
Maxtrac Index
Motorola Index
Back to Home

This article first posted 28-Sep-2006.

This web page, this web site, the information presented in and on its pages and in these modifications and conversions is © Copyrighted 1995 and (date of last update) by Kevin Custer W3KKC and multiple originating authors. All Rights Reserved, including that of paper and web publication elsewhere.

Motorola Gm300 Program Kablosu