To update the BIOS using EZ Flash 2: 1. Insert the USB flash disk that contains the latest BIOS file to the USB port. Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select. ASUS EZ Flash Utility and press to enable it. Press to switch to the Drive field. Jul 24, 2016 There is an Intel Flash Programming tool that will apparently Flash Bricked Bios's Asus EZ flash 2 doesn't see usb I can't continue the BIOS update Solved - Page 5.
2-2
ASUS P5KPL-AM SE
2.1.2
ASUS EZ Flash 2 utility
ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk
and a DOS-based utility.
Download the latest BIOS file for this motherboard from the ASUS website at
www.asus.com.
To update the BIOS using EZ Flash 2.
1.
Insert the USB flash disk that contains the BIOS file to a USB port, then launch EZ
Flash 2 in either of these two ways:
(1) Press <Alt> + <F2> during POST to display the following:
(2) Enter BIOS setup program. Go to the Tools menu to select EZ Flash 2 and press
<Enter> to enable it.
Press <Tab> to switch between drives until the correct BIOS file is found.
2.
Select the correct BIOS file then press <Enter>, EZ Flash 2 updates the BIOS and
automatically reboots the system when done.
• This function supports USB flash disks with FAT 32/16 format and single partition only.
• DO NOT shut down or reset the system while updating the BIOS to prevent system boot
failure!
ASUSTek EZ Flash 2 BIOS ROM Utility V3.25
Current ROM
Update ROM
A:
Note
FLASH TYPE:
MXIC 25L8005
PATH:
Asus Ez Flash 2 Download Windows 10
A:
BOARD:
P5KPL-AM SE
VER:
0309 (H:00 B:01)
DATE:
09/28/2008
Asus Ez Flash Software
BOARD:
Unknown
VER:
Unknown
DATE:
Asus Ez Flash 2 Lan Driver
Unknown
[Enter] Select or Load [Tab] Switch [V] Drive Info
[Up/Down/Home/End] Move [B] Backup [ESC] Exit
I'm using a USB flash drive with the latest BIOS update downloaded onto it. When I get into Asus EZ Flash 2 it can't find the USB stick that the BIOS update is on (F: ). EZ Flash 2 only sees A: B: and C: drives and that is it. I've restarted with the drive plugged in so EZ Flash 2 should recognize that it is there. The USB drive is plugged in on the front and Windows recognizes that it is there. I have an Asus M2N SLI Deluxe 570 motherboard (its kind of old), but with this BIOS update (5001) I should be able to run the latest Phenom II X4 processors that are out (like the 955 and 965). I have Windows Vista.
The problem is probably simple, but Google isn't helping at all with my specific situation. Any help would be greatly appreciated because I won't have to buy a new motherboard to get a better processor if this works. If there is a way to update my BIOS that is different from the way that I am trying it, please explain what it is. Thanks!